In-plane forces and moments on installed inclined propellers at low forward speeds.
Fatigue of aluminium alloy joints with various fastener systems. Low load transfer.
Film thicknesses in lubricated Hertzian contacts. Part 2: point contacts.
Contribution of wing planform to rolling moment derivative due to sideslip, (L sub v) sub w, at subsonic speeds.
Simplified forms of performance equations.
Radial, mixed and axial-flow pumps. Size estimation, and specification.
Radial, mixed and axial flow pumps. Introduction.
Vapour pressures and critical points of liquids. XVII: aliphatic carboxylic acids and anhydrides.
Fatigue strength of large steel bolts and threaded connections under axial loading.
Elastic stress concentration factors. Single reinforced and unreinforced holes in infinite plates of isotropic materials.
The use of Data Items on aircraft performance estimation.
Mean forces, pressures and flow field velocities for circular cylindrical structures: single cylinder with two-dimensional flow.
Blockage corrections for bluff bodies in confined flows.
Structural Members: mean fluid forces on members of various cross sections
Selection of DRD cam laws.
Thermophysical properties of industrially important fluids on the saturation line: Phenol.
Example to illustrate the use of Data Items on noise from ducted ventilation and air-conditioning systems.
Wind Engineering Series organisation: preface location schedule amendment record Issue 6
Examples in the use of the Mollier chart (isentropic flow and Prandtl-Meyer expansion for air in dissociation equilibrium).
Conditions behind oblique shock waves for air in dissociation equilibrium.
Conditions behind normal shock waves in air in dissociation equilibrium.
Conditions for shock wave detachment and for subsonic flow behind nose shock waves on cones at zero incidence and on wedges.
Pitot and static tubes in supersonic flow.
Approximate calculation of the pressure changes in two-dimensional supersonic flow.
Inviscid supersonic flow past cones at zero incidence: (ii) surface pressure coefficient and shock angle for circular cones.
Properties of plane steady shock waves.
One-dimensional isentropic gas flow.
The effect of edge reinforcement on the stresses in skin panels under uniform pressure.
Estimation of the r.m.s. stress in skin panels subjected to random acoustic loading.
Buckling loads in shear of flat sandwich panels. (Isotropic face plates and corrugated cores, all edges simply-supported.)
Buckling loads under combined longitudinal and transverse direct stress of flat sandwich panels. (Isotropic face plates and orthotropic cores of zero flexural stiffness, all edges simply-supported.)
Delamination of tapered composites.