jQuery Mobile Framework
Search Home >> Standards Wordwide >> Australia Standards(AS) >> AS 1418.3-1997 cranes, hoists and winches - bridge, gantry, portal (including container cranes) and jib cranes

AS 1418.3-1997 cranes, hoists and winches - bridge, gantry, portal (including container cranes) and jib cranes

Standard Number:  AS 1418.3-1997
Title:  cranes, hoists and winches - bridge, gantry, portal (including container cranes) and jib cranes
Language:  English
Publication Date:  1997/12/5
Status:  Current
International Classification for Standards (ICS)MATERIALS HANDLING EQUIPMENT>>Lifting equipment>>Cranes
Publisher:  Australia Standards(AS)
Price:  
Number of Pages:53P,;A4  

Description:Specifies the requirements for bridge, gantry, semi-gantry and portal cranes as defined in AS 2549, and for container and heavy duty cranes. Sections are included on classification and load rating, structure, stability, mechanisms, access from fixed plat  
Catalog:Document Contents
AS 1418.3-1997 CRANES, HOISTS AND WINCHES - BRIDGE, GANTRY, PORTAL (INCLUDING CONTAINER C...
PREFACE
CONTENTS
SECTION 1 SCOPE AND GENERAL
1.1 SCOPE
1.2 NEW DESIGN AND INNOVATIONS
1.3 APPLICATION
1.4 REFERENCED DOCUMENTS
1.5 DEFINITIONS
1.5.1 Container crane
1.6 SAFETY
SECTION 2 CLASSIFICATION AND LOAD RATING
SECTION 3 STRUCTURE
3.1 BASIS OF DESIGN
3.2 SLENDERNESS RATIOS OF BRIDGE SECTION
3.3 DEFLECTION
3.3.1 Limits
3.3.2 Leg spread of gantry cranes
3.3.3 Natural frequency
3.3.4 Lateral forces on portal cranes
3.3.5 Camber
3.3.6 Jib cranes
3.4 SPAN TO WHEELBASE RATIO
SECTION 4 STABILITY
SECTION 5 CRANE MECHANISMS
5.1 MECHANISMS
5.2 MOTION LIMITS
5.2.1 Hoisting
5.2.2 Travel
5.2.3 Out-of-service conditions
5.2.4 Rail clamps
5.3 HOISTING UNIT
5.3.1 Wire rope
5.3.2 Drum
5.3.3 Retention of chain
5.4 ATTACHMENTS FOR FREIGHT CONTAINERS
5.4.1 General
5.4.2 Spreader
5.4.3 Twistlock details
5.5 MULTIPLE HOIST/CRAB COMBINATIONS
5.6 MULTIPLE CRANE COMBINATIONS
SECTION 6 ACCESS FROM FIXED PLATFORMS
6.1 ACCESS TO CRANE OPERATING POSITION
6.1.1 General
6.1.2 Access in hazardous environment
6.2 ACCESS FOR SERVICING-SERVICE PLATFORMS
6.2.1 Servicing position of crane
6.2.2 Access for servicing
6.2.3 Height for serviceable items
6.3 ACCESS AND SERVICING FACILITIES
6.3.1 Platforms, walkways, stairways and ladders
6.3.2 Provision of access and servicing facilities
6.3.3 Requirements of access and service facilities located on the crane
SECTION 7 ACCESS FROM MOBILE PLATFORMS
7.1 GENERAL
7.2 USE OF MOBILE PLATFORM
7.3 ACCESS FROM MOBILE PLATFORM
7.4 ACCESS TO CRANE DRIVING POSITION
7.5 ACCESS FOR SERVICING
7.5.1 Servicing position of crane
7.5.2 Access for servicing
7.5.3 Servicing position of platform
7.6 ACCESS AND SERVICING FACILITIES
7.6.1 Provision of access and servicing facilities
7.6.2 Emergency access to control cabin
7.7 NOTICES REQUIRED WHEN USING MOBILE PLATFORMS
SECTION 8 CLEARANCES
8.1 HANDRAIL CLEARANCES
8.2 CLEARANCE ABOVE CRANE OR CRAB
8.3 CLEARANCE BELOW UNLADEN CRANE WITH POWER-DRIVEN TRAVEL OR TRAVERSE MOTION
8.4 CLEARANCES BETWEEN CRANE AND PLATFORMS
8.4.1 Fixed platforms
8.4.2 Mobile platforms
8.5 CLEARANCE AT OR NEAR A CRANE RUNWAY
8.6 CLEARANCE BETWEEN MOVING PARTS OF A CRANE AND A PLATFORM OR WALKWAY
8.7 CLEARANCES BETWEEN HOIST UNIT AND CRANE END CARRIAGE OR RUNWAY
SECTION 9 ELECTRICAL ACCESS ISOLATORS
9.1 GENERAL
9.2 ACCESS ISOLATORS FOR ACCESS FROM FIXED PLATFORMS
9.2.1 Hoisting motion
9.2.2 Travel and traverse motions
9.3 ACCESS ISOLATORS FOR ACCESS FROM MOBILE PLATFORMS
9.3.1 Location of access isolation
9.4 MARKING OF ACCESS ISOLATORS
SECTION 10 SPEED LIMITATIONS FOR PENDANT-CONTROLLED CRANES
SECTION 11 MARKING AND DATA TO BE SUPPLIED WITH CRANE
11.1 MARKING ON CRANE
11.2 MARKING ON LIFTING MEANS
11.3 MANUALS
11.3.1 General
11.3.2 Crane operator's manual
11.3.3 Maintenance manual
11.3.4 Logbook
11.3.5 Parts book
SECTION 12 INSPECTION AND COMMISSIONING
12.1 INSPECTION
12.2 COMMISSIONING
12.2.1 General
12.2.2 Pre-operational inspection and testing
12.2.3 No-load operation and testing
12.2.4 Load testing
12.2.5 Reports
SECTION 13 GUARDING
13.1 GENERAL
13.2 STRENGTH
13.3 MATERIAL
13.4 FIXED GUARDS
13.5 REMOVABLE GUARDS
13.6 INSPECTION POINTS
13.7 MARKING
13.8 TRAVEL MOTION WHEELS
13.9 COLOUR
APPENDIX A - INFORMATION TO BE SUPPLIED WITH ENQUIRY, ORDER, OR TENDER
A1 INFORMATION TO BE SUPPLIED WITH ENQUIRY OR ORDER
A2 INFORMATION TO BE SUPPLIED WITH TENDER
APPENDIX B - LIST OF TYPICAL HAZARDS
APPENDIX C - ACCESS AND CLEARANCE REQUIREMENTS FOR FIXED PLATFORMS
APPENDIX D - TYPICAL CRANE DRIVE DIAGRAMS
  
File Format:  PDF(Acrobat Reader) or Word version doc Document
File Size:  746KB
Tile in English:  cranes, hoists and winches - bridge, gantry, portal (including container cranes) and jib cranes

Full Text Information

Related

Top 10

New 10

PC Version