jQuery Mobile Framework
Search Home >> Standards Wordwide >> Australia Standards(AS) >> AS 1565-1996 copper and copper alloys - ingots and castings

AS 1565-1996 copper and copper alloys - ingots and castings

Standard Number:  AS 1565-1996
Title:  copper and copper alloys - ingots and castings
Language:  English
Publication Date:  1996/9/5
Execute Date:  1996/9/5
Status:  Current
International Classification for Standards (ICS)METALLURGY>>Products of non-ferrous metals>>Copper products
Publisher:  Australia Standards(AS)
Price:  
Number of Pages:32P.;A4  

Description:specifies requirements for the manufacture and testing of high conductivity copper castings and copper alloy ingots and castings. includes a coding system for when additional inspection is required, and also includes a guide to alloy selection.  
Catalog:Document Contents
AS 1565-1996 COPPER AND COPPER ALLOYS - INGOTS AND CASTINGS
PREFACE
CONTENTS
1 SCOPE
2 REFERENCED DOCUMENTS
3 DEFINITION
3.1 Cast
4 DESIGNATION
5 MATERIALS
5.1 Chemical composition
5.2 Mechanical properties (optional)
5.3 Resistance to dezincification
5.4 Electrical resistivity (applicable to alloys C80100 and C81500)
5.5 Microstructure of castings (applicable to alloy C86500 only)
6 FREEDOM FROM DEFECTS
7 TEST PROCEDURES AND REQUIREMENTS
7.1 Mechanical tests
7.2 Electrical tests
8 ROUNDING OF TEST RESULT VALUES
8.1 General
8.2 Tensile test results
9 MARKING
9.1 Ingots
9.2 Castings
APPENDIX A - PURCHASING GUIDELINES
A1 GENERAL
A2 INFORMATION TO BE SUPPLIED BY THE PURCHASER
A3 PATTERNS, DRAWINGS AND SAMPLES OF THE CASTING
A3.1 New patterns
A3.2 Existing patterns and equipment
A3.3 Sample casting or drawing
A4 IDENTIFICATION
A5 RECTIFICATION OF DEFECTS
A5.1 General
A5.2 Repair by welding
A6 TEST REQUIREMENTS FOR CASTINGS
A6.1 General
A6.2 Frequency of testing
A6.3 Mechanical tests on standard test bars
A6.4 Additional test requirements for castings
A6.5 Retests
A6.6 Independent tests
APPENDIX B - CODING SYSTEM WHEN ADDITIONAL INSPECTION IS REQUIRED FOR CASTINGS
B1 GENERAL
B2 INFORMATION TO BE INCLUDED IN THE TEST SCHEDULE
B3 CODE A (ANALYSIS)
B4 CODE T (MECHANICAL TESTS)
B5 CODE M (MACHINING)
B6 CODE P (PRESSURE TESTING)
B6.1 Exclusions
B6.2 Requirements
B7 CODE F (PENETRANT FLAW DETECTION)
B8 CODES R1 AND R2 (RADIOGRAPHIC EXAMINATION)
B8.1 Marking of test regions
B8.2 Grades
B8.3 Repairs
B8.4 Approval
B9 CODE C (ELECTRICAL CONDUCTIVITY TESTING)
APPENDIX C - RELATED COMPOSITION SPECIFICATIONS
APPENDIX D - COLOUR CODE FOR INGOTS
APPENDIX E - SHAPES OF STANDARD TEST BARS
E1 BNF ?CAST TO SHAPE? TEST SAMPLE
E2 SAND-CAST TEST SAMPLE
E3 CHILL-CAST TEST BARS
APPENDIX F - A GUIDE TO ALLOY SELECTION
F1 INTRODUCTION
F2 CORROSION RESISTANCE
F2.1 Atmospheric corrosion
F2.2 Corrosion by water
F2.3 Resistance to chemical attack
F3 WEAR RESISTANCE (BEARINGS AND GEARS)
F3.1 General
F3.2 Working load
F3.3 Hardness and material of shaft or mating gear
F3.4 Surface speed at the bearing face
F3.5 Lubrication
F3.6 Working temperature with consideration of peak temperature
F3.7 Abrasive material
F3.8 Recommendations
F4 SERVICE AT ELEVATED TEMPERATURES (INCLUDING SUPERHEATED STEAM)
F4.1 General
F4.2 Resistance to superheated steam
F4.3 Resistance to oxidation
F4.4 Load carrying capacity
F5 PRESSURE TIGHTNESS
  
File Format:  PDF(Acrobat Reader) or Word version doc Document
File Size:  631KB
Tile in English:  copper and copper alloys - ingots and castings

Full Text Information

Related

Top 10

New 10

PC Version