jQuery Mobile Framework
Search Home >> Standards Wordwide >> Australia Standards(AS) >> AS/NZS 1194.5-1996 winding wires - test methods

AS/NZS 1194.5-1996 winding wires - test methods

Standard Number:  AS/NZS 1194.5-1996
Title:  winding wires - test methods
Language:  English
Publication Date:  1996/9/5
Execute Date:  1996/9/5
Status:  Current
International Classification for Standards (ICS)ELECTRICAL ENGINEERING>>Electrical wires and cables>>Wires
Publisher:  Australia Standards(AS)
Price:  
Number of Pages:44P.;A4  

Description: This Standard specifies the test methods for round and rectangular, copper and aluminium enamelled winding wires in AS/NZS 1194 Parts 1 to 4, where relevant.  
Catalog:Document Contents
AS/NZS 1194.5: 1996 WINDING WIRES - TEST METHODS
PREFACE
CONTENTS
SECTION 1 SCOPE AND GENERAL
1.1 SCOPE
1.2 REFERENCED DOCUMENTS
SECTION 2 TESTS
2.1 GENERAL TEST CONDITIONS
2.2 DIMENSIONS
2.2.1 Measuring equipment
2.2.2 Overall diameter of round wire
2.2.3 Conductor diameter of round wire
2.2.4 Increase in diameter of round conductor due to enamel or enamel plus bond layer
2.2.5 Out-of-roundness of round conductor (nominal conductor diameters not less than 0.07...
2.2.6 Overall dimensions of the rectangular wire
2.2.7 Conductor dimensions of the rectangular wire
2.2.8 Rounding of corners of the rectangular wire
2.3 ELECTRICAL RESISTANCE
2.3.1 Procedure
2.3.2 Number of tests
2.4 ELONGATION AND TENSILE STRENGTH
2.4.1 Procedure
2.4.2 Number of tests
2.5 SPRINGINESS
2.5.1 For round copper wires of nominal conductor diameters 0.050 mm to 1.60 mm
2.5.2 For round copper wires with nominal conductor diameter over 1.6 mm and rectangular ...
2.6 BREAKDOWN VOLTAGE
2.6.1 Test voltage
2.6.2 Test for round copper nominal conductor diameters not exceeding 0.100 mm
2.6.3 Round copper nominal conductor diameters exceeding 0. 100 mm but not exceeding 2. 5...
2.6.4 Tests on round wire exceeding 2. 5 mm diameter and rectangular wire
2.7 CONTINUITY OF COVERING FOR ROUND WIRES
2.7.1 Application of test
2.7.2 Low voltage d.c. test (copper nominal conductor diameters less than 0.080 mm)
2.7.3 High voltage d.c. test (copper nominal diameter greater than or equal to 0.08 mm di...
2.8 FLEXIBILITY AND ADHESION
2.8.1 Mandrel winding test-round wires (nominal conductor diameters not exceeding 1. 6 mm)
2.8.2 Stretching test-round wires (nominal conductor diameters exceeding 1.60 mm) and rec...
2.8.3 Mandrel winding test-rectangular wires
2.8.4 Jerk test-round wires (nominal conductor diameters not exceeding 1.00 mm)
2.8.5 Peel test-round copper wires (nominal conductor diameters exceeding 1.00 mm)
2.9 HEAT SHOCK
2.9.1 Circular wires
2.9.2 Rectangular wires
2.10 UNIDIRECTIONAL SCRAPE TEST FOR ROUND WIRES (Nominal conductor diameters 0. 250 mm to...
2.10.1 Apparatus
2.10.2 Test procedure
2.10.3 Number of tests
2.11 CUT-THROUGH TEST FOR ROUND WIRES
2.11.1 Principle
2.11.2 Test procedure
2.12 RESISTANCE TO SOLVENTS
2.12.1 Round and rectangular wires
2.13 THERMAL ENDURANCE
2.14 RESISTANCE TO REFRIGERANTS FOR ROUND WIRES
2.14.1 Extraction with methanol
2.14.2 Extraction with refrigerant
2.14.3 Solvent test in refrigerant
2.14.4 Blister test in refrigerant
2.15 SOLDERABILITY OF ROUND COPPER WIRES
2.15.1 Preparation of test specimen
2.15.2 Test apparatus
2.15.3 Test procedure
2.15.4 Number of tests
2.16 HEAT BONDING TEST FOR ROUND WIRES
2.16.1 Vertical bond retention on a helical coil
APPENDIX A - ENAMEL REMOVAL
APPENDIX B - ROUNDING OF CORNERS ?SAMPLE PREPARATION?
APPENDIX C - PENCIL HARDNESS
C1 INTRODUCTION
C2 POINT STRENGTH
C3 WEAR AND OPACITY
C4 POINT-STRENGTH TEST
C5 WEAR AND OPACITY TEST
C5.1 General
C5.2 Apparatus
C5.3 Procedure
  
File Format:  PDF(Acrobat Reader) or Word version doc Document
File Size:  745KB
Tile in English:  winding wires - test methods

Full Text Information

Related

Top 10

New 10

PC Version