jQuery Mobile Framework
Search Home >> Standards Wordwide >> Australia Standards(AS) >> AS/NZS 1200-2000 pressure equipment

AS/NZS 1200-2000 pressure equipment

Standard Number:  AS/NZS 1200-2000
Title:  pressure equipment
Language:  English
Replaced by Standard:  AS/NZS 1200-1994 pressure equipment

Replacing Standard:  AS/NZS 1200-1994 pressure equipment

Publication Date:  2000/6/23
Execute Date:  2000/6/23
Status:  Current
Publisher:  Australia Standards(AS)
Price:  
Number of Pages:43P.;A4  

Description:sets out basic requirements and good practice for the design, materials, manufacture, examination,testing, installation, conformity assessment, commissioning, operation, inspection, maintenance, repair, alteration and disposal of pressure equipment (boilers, pressure vessels and pressure piping) but excluding gas cylinders. includes detailed requirements for various pressure equipment by direct reference to a range of australian, new zealand and other standards.  
Catalog:Document Contents
AS/NZS 1200:2000 PRESSURE EQUIPMENT
PREFACE
CONTENTS
SECTION 1 SCOPE AND GENERAL
1.1 SCOPE
1.2 OBJECTIVE
1.3 APPLICATION
1.4 DEFINITIONS
1.5 REFERENCED DOCUMENTS
1.6 SUPPLEMENT, AMENDMENT, ENQUIRY CASE AND RULING
1.6.1 Enquiry
1.6.2 Supplement, Amendment, Enquiry Case and Ruling
1.7 NEW DESIGNS, MATERIALS AND MANUFACTURING METHODS
1.8 ROUNDING OF NUMERICAL VALUES
1.9 CONVERSION OF UNITS
1.10 TOLERANCES
1.11 CONCESSIONS
1.12 IMPLEMENTATION
1.13 REFERENCE TO STANDARDS
SECTION 2 BASIC REQUIREMENTS AND COMPLIANCE STANDARDS
2.1 BASIC REQUIREMENTS AND RECOMMENDATION
2.2 COMPLIANCE STANDARDS
2.3 MIXING STANDARDS
APPENDIX A - EQUIPMENT COVERED BY THIS STANDARD
A1 PRESSURE EQUIPMENT COVERED
A2 EXAMPLES
A3 EQUIPMENT OR PLANT UNDER PRESSURE NOT SPECIFICALLY COVERED
APPENDIX B - ENQUIRY (OPINION, INTERPRETATION, ENQUIRY CASE AND RULING) ON THIS STANDARD ...
B1 INTRODUCTION
B2 ENQUIRY
B3 APPLICATION FOR ENQUIRY
APPENDIX C - MATERIALS FOR USE UNDER THIS STANDARD
C1 POLICY FOR MATERIALS
C1.1 General
C1.2 Permitted material Standards
C1.3 Alternative national Standards
C2 NEW MATERIAL
C2.1 Amendment or Supplement
C2.2 Mechanical properties
C2.3 Weldability
C2.4 Physical changes
APPENDIX D - NEW ZEALAND REGULATORY MATTERS
D1 GENERAL
D2 SPECIFIC REQUIREMENTS
D2.1 Design verification
D2.2 Fabrication inspection
D2.3 Inspection openings
APPENDIX E - DEFINITIONS
E1 GENERAL
E2 DEFINITIONS
APPENDIX F - COMPARISON OF PRESSURE EQUIPMENT STANDARDS WITH OTHER OVERSEAS STANDARDS
F1 SCOPE
F2 COMPARISON OF AUSTRALIAN AND OVERSEAS PRESSURE EQUIPMENT STANDARDS
APPENDIX G - ORGANIZATION OF AUSTRALIAN, NEW ZEALAND AND OTHER PRESSURE EQUIPMENT STANDAR...
APPENDIX H - LIST OF REFERENCED DOCUMENTS
APPENDIX I - NEW ZEALAND REQUIREMENTS FOR SEISMIC, WIND AND SNOW LOADINGS FOR PRESSURE EQ...
I1 SEISMIC LOADINGS
I2 ADDITIONAL REQUIREMENTS FOR SEISMIC LOADINGS
I3 WIND AND SNOW LOADINGS
APPENDIX J - SAFETY RECOMMENDATIONS
J1 GENERAL
J2 BASIC RECOMMENDATIONS
J2.1 Design and manufacture
J2.2 Use
J3 DESIGN
J3.1 General
J3.2 Design for adequate strength and deflection control
J3.3 Design for safe handling and operation
J3.4 Means of examination
J3.5 Means of isolation, draining and venting
J3.6 Corrosion or other chemical attack
J3.7 Wear
J3.8 Provisions for filling and discharge
J3.9 Protection against exceeding allowable limits
J3.10 Safety accessories
J3.11 External fire
J4 MANUFACTURE
J4.1 Manufacturing procedures
J4.2 Final assessment
J4.3 Marking and labelling
J4.4 Operating instructions
J5 MATERIALS
J5.1 General
J5.2 Materials for pressurized parts
J5.3 Documentation
J5.4 Compliance
J6 SAFETY REQUIREMENTS FOR SPECIAL APPLICATIONS
J6.1 Fired or otherwise heated pressure equipment with a risk of overheating
J6.2 Additional safety recommendations for piping
J7 USE
J7.1 General
J7.2 Equipment operations
J7.3 Safety management system
  
File Format:  PDF(Acrobat Reader) or Word version doc Document
File Size:  168KB
Tile in English:  pressure equipment

Full Text Information

Related

Top 10

New 10

PC Version