jQuery Mobile Framework
Search Home >> Standards Wordwide >> Australia Standards(AS) >> AS/NZS 1221-1997 fire hose reels

AS/NZS 1221-1997 fire hose reels

Standard Number:  AS/NZS 1221-1997
Title:  fire hose reels
Language:  English
Replacing Standard:  AS 1221-1991 fire hose reels

Publication Date:  1997/11/5
Execute Date:  1997/11/5
Status:  Current
International Classification for Standards (ICS)ENVIRONMENT. HEALTH PROTECTION. SAFETY>>Protection against fire>>Fire-fighting
Publisher:  Australia Standards(AS)
Price:  
Number of Pages:30P.;A4  

Description:This Standard specifies requirements for design, construction and performance of fixed and swing arm type fire hose reels intended for use by one operator. It does not include requirements for location or maintenance of fire hose reels since these subjects are covered in other Standards. NOTES: 1 Methods for demonstrating compliance with this Standard are given in Appendix 'A'. 2 A fire hose reel is generally referred to in this document as 'a hose reel' or 'the hose reel'.   
Catalog:Document Contents
AS/NZS 1221:1997 FIRE HOSE REELS
PREFACE
CONTENTS
SECTION 1 SCOPE AND GENERAL
1.1 SCOPE
1.2 NEW DESIGNS AND INNOVATIONS
1.3 REFERENCED DOCUMENTS
1.4 DEFINITIONS
1.4.1 Approved
1.4.2 Automatic fire hose reel
1.4.3 Fire hose reel
1.4.4 Fixed fire hose reel
1.4.5 Jet
1.4.6 Manual fire hose reel
1.4.7 Regulatory authority
1.4.8 Spray
1.4.9 Surface mounted
1.4.10 Swing fire hose reel
1.5 INTERPRETATION OF SPECIFIED LIMITING VALUES
SECTION 2 DESIGN AND CONSTRUCTIONREQUIREMENTS
2.1 GENERAL
2.1.1 Design
2.1.2 Operation
2.1.3 Anti-corrosion treatment
2.1.4 Finish
2.1.5 Screw threads
2.2 COMPONENTS
2.2.1 Hose
2.2.2 Nozzle
2.2.3 Drum
2.2.4 Inlet pipe
2.2.5 Connection fitting
2.2.6 Water supply
2.2.7 Stop valve and interlock
2.2.8 Hose guide
2.3 CABINETS
2.3.1 General
2.3.2 Cabinet doors
2.3.3 Swing arm
2.4 HOSE REEL SWING ARM
SECTION 3 PERFORMANCE REQUIREMENTS
3.1 GENERAL
3.2 FIRE HOSE REEL
3.2.1 Resistance to internal pressure
3.2.2 Strength tests
3.2.3 Unwind test
3.2.4 Discharge tests
3.3 COMPONENTS
3.3.1 General
3.3.2 Nozzle
SECTION 4 MARKING
4.1 HOSE
4.2 NOZZLE
4.3 HOSE REEL
4.3.1 General
4.3.2 'Not applicable'
4.3.3 Operating and rewind instructions
4.4 MANUAL STOP VALVE
4.5 CABINET
4.6 INSTALLATION INSTRUCTIONS
APPENDIX A - MEANS FOR DEMONSTRATING COMPLIANCE WITH THIS STANDARD
A1 SCOPE
A2 STATISTICAL SAMPLING
A3 PRODUCT CERTIFICATION
A4 SUPPLIER'S QUALITY SYSTEM
A5 OTHER MEANS OF ASSESSMENT
APPENDIX B - HOSE REEL ASSEMBLY-PRESSURE TEST
B1 SCOPE
B2 PRINCIPLE
B3 APPARATUS
B4 PROCEDURE
B5 REPORTING OF RESULTS
APPENDIX C - LOAD TEST
C1 SCOPE
C2 PRINCIPLE
C3 APPARATUS
C4 PROCEDURE
C5 REPORTING OF RESULTS
APPENDIX D - STRENGTH TEST FOR SIDE PLATES
D1 SCOPE
D2 PRINCIPLE
D3 APPARATUS
D4 CALCULATION
D5 PROCEDURE
D6 REPORTING OF RESULTS
APPENDIX E - FLOW RATE TEST
E1 SCOPE
E2 PRINCIPLE
E3 APPARATUS
E4 PROCEDURE
E5 REPORTING OF RESULTS
APPENDIX F - DISPERSAL TEST
F1 SCOPE
F2 PRINCIPLE
F3 APPARATUS
F4 PROCEDURE
F5 REPORTING OF RESULTS
APPENDIX G - NOZZLE TEST FOR A TWIST NOZZLE
G1 SCOPE
G2 PRINCIPLE
G3 APPARATUS
G4 CALCULATION
G5 PROCEDURE
G6 REPORTING OF RESULTS
APPENDIX H - NOZZLE TEST FOR OTHER THAN A TWIST NOZZLE
H1 SCOPE
H2 PRINCIPLE
H3 APPARATUS
H4 PROCEDURE
H5 REPORTING OF RESULTS
AMENDMENT CONTROL SHEET
  
File Format:  PDF(Acrobat Reader) or Word version doc Document
File Size:  836KB
Tile in English:  fire hose reels

Full Text Information

Related

Top 10

New 10

PC Version