jQuery Mobile Framework
Search Home >> Standards Wordwide >> Australia Standards(AS) >> AS/NZS 1838-1994 swimming pools - premoulded fibre-reinforced plastics - design and fabrication

AS/NZS 1838-1994 swimming pools - premoulded fibre-reinforced plastics - design and fabrication

Standard Number:  AS/NZS 1838-1994
Title:  swimming pools - premoulded fibre-reinforced plastics - design and fabrication
Language:  English
Publication Date:  1994/11/14
Execute Date:  1994/11/14
Status:  Current
Publisher:  Australia Standards(AS)
Price:  
Number of Pages:12P.;A4  

Description:Sets out requirements for premoulded plastic swimming pools exceeding 7500 L in volume and 750 mm in depth, constructed from fibre-reinforced plastics based on thermosetting resin systems. Minimum design soil loads are given for the design of the pool. I  
Catalog:Document Contents
AS/NZS 1838:1994 SWIMMING POOLS - PREMOULDED FIBRE-REINFORCED PLASTICS - DESIGN AND FABR...
PREFACE
CONTENTS
1 SCOPE
2 REFERENCED DOCUMENTS
3 DEFINITIONS
3.1 Composite
3.2 Concrete bond beam
3.3 Coping
3.4 Corrosion barrier
3.5 Cosmetic layer
3.6 Outer surface layer
3.7 Structural layer
4 MATERIALS
4.1 Resin
4.2 Gelcoat
4.3 Reinforcement
4.4 Additives
4.5 Use of alternative materials or methods
5 DESIGN CONSIDERATIONS
5.1 General
5.2 Pools for installation in the ground
5.3 Pools for installation above the ground
5.4 Subpool drainage
6 CONSTRUCTION REQUIREMENTS
6.1 General
6.2 Cosmetic layer
6.3 Corrosion barrier
6.4 Structural layer
6.5 Outer surface layer
6.6 Cure
6.7 Freedom from defects
6.8 Design details
7 PERFORMANCE REQUIREMENTS
7.1 Material properties
7.2 Chemical-resistance test
7.3 Water-resistance test
7.4 Dynamic load test for pools installed above the ground
7.5 Acetone test
7.6 Barcol hardness
7.7 Actual in-service performance
8 MARKING
APPENDIX A - DETERMINATION OF RESIN AND GLASS CONTENT OF CORROSION BARRIER AND STRUCTURAL...
A1 SCOPE
A2 APPARATUS
A2.1 Crucibles
A2.2 Muffle furnace
A2.3 Desiccator
A2.4 Balance
A2.5 Fume cupboard
A3 TEST SPECIMENS
A4 CONDITIONING
A5 PROCEDURE
A6 CALCULATIONS
A7 REPORT
APPENDIX B - DESIGN GUIDANCE
B1 GENERAL
B2 NEW TECHNOLOGY
B3 DESIGN PRESSURES
APPENDIX C - DYNAMIC LOAD TEST
C1 SCOPE
C2 PRINCIPLE
C3 APPARATUS
C3.1 Drum
C3.2 Release device
C3.3 Measuring equipment
C4 PROCEDURE
C5 REPORT
APPENDIX D - PREPARATION AND CONDITIONING OF TEST PANELS
D1 PREPARATION OF TEST PANELS
D2 CONDITIONING
APPENDIX E - CHEMICAL-RESISTANCE TEST
E1 SCOPE
E2 PRINCIPLE
E3 APPARATUS
E3.1 Heating system
E3.2 Beakers
E3.3 Beaker cover
E3.4 pH meter
E4 REAGENTS
E4.1 Calcium hypochlorite
E4.2 Concentrated hydrochloric acid
E5 PREPARATION OF TEST SPECIMENS
E6 PROCEDURE
E7 CHEMICAL-RESISTANCE RATING
E8 REPORT
APPENDIX F - WATER-RESISTANCE TEST
F1 SCOPE
F2 PRINCIPLE
F3 APPARATUS
F3.1 Test tank
F3.2 Gaskets
F3.3 Thickness measuring instrument
F3.4 Barcol hardness impressor model No. 934-1
F4 PREPARATION OF TEST SPECIMENS
F5 PROCEDURE
F6 WATER- RESISTANCE RATING
F7 REPORT
  
File Format:  PDF(Acrobat Reader) or Word version doc Document
File Size:  258KB
Tile in English:  swimming pools - premoulded fibre-reinforced plastics - design and fabrication

Full Text Information

Related

Top 10

New 10

PC Version