jQuery Mobile Framework
Search Home >> Standards Wordwide >> Australia Standards(AS) >> AS/NZS 1866-1997 aluminium and aluminium alloys - extruded rod, bar, solid and hollow shapes

AS/NZS 1866-1997 aluminium and aluminium alloys - extruded rod, bar, solid and hollow shapes

Standard Number:  AS/NZS 1866-1997
Title:  aluminium and aluminium alloys - extruded rod, bar, solid and hollow shapes
Language:  English
Publication Date:  1997/9/5
Execute Date:  1997/9/5
Status:  Current
International Classification for Standards (ICS)METALLURGY>>Products of non-ferrous metals>>Aluminium products
Publisher:  Australia Standards(AS)
Price:  
Number of Pages:45P.;A4  

Description:Specifies requirements for aluminium and aluminium alloy extruded rod, bar, solid and hollow shape products for general engineering purposes. Chemical composition and mechanical properties are specified, and allowable tolerances on dimensions are include  
Catalog:Document Contents
AS/NZS 1866:1997 ALUMINIUM AND ALUMINIUM ALLOYS - EXTRUDED ROD, BAR, SOLID AND HOLLOW SH...
PREFACE
CONTENTS
SECTION 1 SCOPE AND GENERAL
1.1 SCOPE
1.2 REFERENCED DOCUMENTS
1.3 DEFINITIONS
1.3.1 Bar
1.3.2 Batch
1.3.3 Circumscribing circle diameter (or circle size)
1.3.4 Die line
1.3.5 Finish
1.3.6 Machining stock
1.3.7 Rod
1.3.8 Semi-hollow section
1.4 DESIGNATION
1.4.1 General
1.4.2 Alloy designation
1.4.3 Temper designation
1.5 CLASSIFICATION OF HOLLOW EXTRUDED SHAPES
1.6 ROUNDING OF TEST RESULTS VALUES
1.6.1 General
1.6.2 Measured dimensions
1.6.3 Tensile test results
1.7 MARKING
1.8 TRACEABILITY
SECTION 2 MANUFACTURING REQUIREMENTS
2.1 SCOPE
2.2 CHEMICAL COMPOSITION
2.2.1 General
2.2.2 Chemical analysis
2.3 SURFACE FINISH
2.4 FREEDOM FROM DEFECTS
2.5 MECHANICAL PROPERTIES
2.6 MANUFACTURING TOLERANCES
SECTION 3 MECHANICAL TESTING REQUIREMENTS
3.1 SCOPE
3.2 SAMPLING FOR MECHANICAL TESTING
3.3 LOCATION AND PREPARATION OF TENSILE TEST PIECES
3.3.1 General
3.3.2 Rod and bar
3.3.3 Shapes
3.3.4 Tubular products
3.4 TENSILE TEST
3.5 RETESTING
SECTION 4 MANUFACTURING TOLERANCES
4.1 SCOPE
4.2 DIAMETER TOLERANCES FOR EXTRUDED MACHINING ROD (ALLOYS 2011 AND 6262 ONLY)
4.3 DISTANCE-ACROSS-FLATS TOLERANCES FOR EXTRUDED MACHINING HEXAGONAL BAR (ALLOYS 2011 AN...
4.4 DIAMETER, WIDTH AND DEPTH TOLERANCES FOR CLASS A HOLLOW SHAPES
4.5 WALL THICKNESS TOLERANCES FOR CLASS A HOLLOW SHAPES
4.6 CROSS-SECTIONAL TOLERANCES FOR ROD, BAR, SOLID SHAPES AND CLASS B, C AND D HOLLOW SHA...
4.6.1 General
4.6.2 Examples illustrating the use of Table 4.6
4.7 LENGTH TOLERANCES
4.8 TWIST TOLERANCES
4.8.1 General
4.8.2 Conversion of twist tolerance to a linear value
4.9 STRAIGHTNESS TOLERANCES
4.10 FLATNESS (FLAT SURFACE) TOLERANCES
4.11 TOTAL TRANSVERSE FLATNESS TOLERANCES
4.12 ANGULARITY TOLERANCES
4.13 CONTOUR TOLERANCES
4.14 CORNER AND FILLET RADII TOLERANCES
4.15 SQUARENESS-OF-CUT-ENDS TOLERANCE
SECTION 5 YACHT MASTS
5.1 SCOPE
5.2 CROSS-SECTIONAL DIMENSION TOLERANCES
5.3 TWIST TOLERANCES
APPENDIX A - PURCHASING GUIDELINES
A1 GENERAL
A2 INFORMATION TO BE SUPPLIED BY THE PURCHASER
A3 TEST REQUIREMENTS
A3.1 Tensile test
A3.2 Independent tests
A4 SURFACE FINISH
APPENDIX B - TYPICAL FABRICATION CHARACTERISTICS AND APPLICATION DATA
  
File Format:  PDF(Acrobat Reader) or Word version doc Document
File Size:  242KB
Tile in English:  aluminium and aluminium alloys - extruded rod, bar, solid and hollow shapes

Full Text Information

Related

Top 10

New 10

PC Version