jQuery Mobile Framework
Search Home >> Standards Wordwide >> Australia Standards(AS) >> AS/NZS 3017-2007 electrical installations - verification guidelines

AS/NZS 3017-2007 electrical installations - verification guidelines

Standard Number:  AS/NZS 3017-2007
Title:  electrical installations - verification guidelines
Language:  English
Publication Date:  2007/11/5
Status:  Current
Publisher:  Australia Standards(AS)
Price:  
Number of Pages:48P.;A4  

Description:Provides persons who carry out the verification of electrical installations with some methods of checking that the installations complies with the safety requirements for the prevention of fire or persons or livestock from sustaining an electric shock.  
Catalog:Document Contents
AS/NZS 3017:2007 ELECTRICAL INSTALLATIONS-VERIFICATION GUIDELINES
PREFACE
CONTENTS
SECTION 1 SCOPE AND GENERAL
1.1 SCOPE
1.2 SAFETY
1.3 REFERENCED DOCUMENTS
1.4 DEFINITIONS
1.5 SEQUENCE OF TESTS
1.6 FAILURE OF A TEST
1.7 TEST EQUIPMENT
1.7.1 Equipment checks
1.7.2 Equipment
SECTION 2 VISUAL INSPECTION
2.1 GENERAL
2.2 CHECK LIST
SECTION 3 TESTS
3.1 EARTH CONTINUITY AND RESISTANCE
3.1.1 Objective
3.1.2 Requirements
3.1.3 Test procedures
3.1.4 Testing considerations
3.2 INSULATION RESISTANCE
3.2.1 Objective
3.2.2 Requirements
3.2.3 Test procedures
3.2.4 Testing considerations
3.3 POLARITY
3.3.1 Objective
3.3.2 Requirements
3.3.3 Test procedures
3.4 CORRECT CIRCUIT CONNECTIONS
3.4.1 Objective
3.4.2 Requirements
3.4.3 Test procedures
3.4.4 Testing considerations
3.5 CHECK OF PHASE SEQUENCE
3.5.1 Objective
3.5.2 Test procedure
3.6 EARTH FAULT-LOOP IMPEDANCE
3.6.1 Objective
3.6.2 Earth fault-loop
3.6.3 Requirements
3.6.3.1 Supply connected
3.6.3.2 Supply not connected
3.6.4 Testing considerations
3.6.4.1 Supply connected
3.6.4.2 Supply not connected
3.7 OPERATION OF RESIDUAL CURRENT DEVICES (RCDs)
3.7.1 Objective
3.7.2 Requirements
3.7.2.1 Testing by use of the integral test device
3.7.2.2 Testing by special test equipment
3.7.2.3 Confirmation of RCD type
3.8 METHOD FOR MEASUREMENT OF THE RESISTANCE OF THE EARTH ELECTRODE
3.8.1 Objective
3.8.2 Requirements
3.8.3 Test procedures
3.8.3.1 Test using an earth fault-loop impedance meter
3.8.3.2 Test of the resistance to ground of the installation earth electrode using the ?f...
3.8.3.3 Test using an earth ground clamp meter
3.9 MEASUREMENT OF TOUCH VOLTAGE
3.9.1 Objective
3.9.2 Requirement
3.9.3 Test procedures
3.10 TEST FOR CONTINUITY AND RESISTANCE OF THE INCOMING NEUTRAL
3.10.1 Objective
3.10.2 Test procedures
3.10.2.1 Test using an earth fault-loop impedance meter
3.10.2.2 Test using a clamp type ammeter
3.10.2.3 Test using a volt meter
3.10.2.4 Test using a proprietary
3.10.3 Testing considerations
  
File Format:  PDF(Acrobat Reader) or Word version doc Document
File Size:  481KB
Tile in English:  electrical installations - verification guidelines

Full Text Information

Related

Top 10

New 10

PC Version