jQuery Mobile Framework
Search Home >> Standards Wordwide >> Australia Standards(AS) >> AS/NZS 3679.1-1996 structural steel - hot-rolled bars and sections

AS/NZS 3679.1-1996 structural steel - hot-rolled bars and sections

Standard Number:  AS/NZS 3679.1-1996
Title:  structural steel - hot-rolled bars and sections
Language:  English
Publication Date:  1996/2/5
Status:  AvailableW
International Classification for Standards (ICS)METALLURGY>>Iron and steel products>>Steel bars and rods
Publisher:  Australia Standards(AS)
Price:  
Number of Pages:42P.;A4  

Description:Specifies requirements for the production and supply of hot-rolled structural steel bars and sections for general structural and engineering applications.  
Catalog:Document Contents
AS/NZS 3679.1:1996 STRUCTURAL STEEL - HOT-ROLLED BARS AND SECTIONS
PREFACE
CONTENTS
1 SCOPE
2 REFERENCED DOCUMENTS
3 DEFINITIONS
3.1 Analysis
3.1.1 Cast analysis
3.1.2 Product analysis
3.2 Bars
3.3 Batch
3.4 Can
3.5 Longitudinal direction
3.6 May
3.7 Off-square
3.8 Out-of-hexagon
3.9 Out-of-round
3.10 Out-of-square
3.11 Primary rolled product
3.12 Sections
3.13 Shall
3.14 Should
3.15 Testing
3.16 Test piece
3.17 Test sample
3.18 Test specimen
3.19 Transverse direction
4 DESIGNATION
5 CHEMICAL COMPOSITION
5.1 General
5.2 Cast analysis
5.3 Product analysis
5.4 Residual elements
6 DIMENSIONS
7 MANUFACTURING TOLERANCES
7.1 Bars
7.2 Sections
8 FREEDOM FROM DEFECTS
8.1 General
8.2 Removal of surface defects
8.2.1 Bars
8.2.2 Sections
8.3 Weld repair of surface defects
8.3.1 General
8.3.2 Welding
9 SELECTION OF TEST SAMPLES
9.1 General
9.2 Sampling and testing
10 POSITION AND ORIENTATION OF TEST PIECES
11 PREPARATION OF TEST PIECES FOR MECHANICAL TESTING
11.1 General
11.2 Tensile test piece
11.2.1 General
11.2.2 Bars
11.2.3 Sections
11.3 Impact test piece
12 TESTING PROCEDURES
12.1 Tensile test
12.2 Charpy V-notch impact test
13 MECHANICAL TEST REQUIREMENTS
13.1 Tensile tests
13.2 Impact tests
14 IDENTIFICATION
15 ROUNDING OF NUMBERS
15.1 General
15.2 Tensile properties
APPENDIX A - PURCHASING GUIDELINES
A1 GENERAL
A2 INFORMATION TO BE SUPPLIED BY THE PURCHASER
A3 NON-DESTRUCTIVE EXAMINATION
A4 INDEPENDENT TESTS
A5 CERTIFICATE OF COMPLIANCE AND TEST CERTIFICATE
A5.1 Certificate of compliance
A5.2 Test certificate
A6 INSPECTION
APPENDIX B - MEANS FOR DEMONSTRATING COMPLIANCE WITH THIS STANDARD
B1 SCOPE
B2 STATISTICAL SAMPLING
B3 PRODUCT CERTIFICATION
B4 SUPPLIER'S QUALITY SYSTEM
B5 OTHER MEANS OF ASSESSMENT
B5.1 General
B5.2 Sampling
B5.3 Compliance
B5.4 Retests
APPENDIX C - COLD-BENDING OF ROUNDS, FLATS AND SQUARES DURING FABRICATION
APPENDIX D - MEASUREMENT OF CAMBER AND SWEEP IN UNIVERSAL SECTIONS (See Tables 9 and 10)
D1 CAMBER
D2 SWEEP
  
File Format:  PDF(Acrobat Reader) or Word version doc Document
File Size:  174KB
Tile in English:  structural steel - hot-rolled bars and sections

Full Text Information

Related

Top 10

New 10

PC Version