jQuery Mobile Framework
Search Home >> Standards Wordwide >> Australia Standards(AS) >> AS/NZS 3725-2007 design for installation of buried concrete pipes

AS/NZS 3725-2007 design for installation of buried concrete pipes

Standard Number:  AS/NZS 3725-2007
Title:  design for installation of buried concrete pipes
Language:  English
Replacing Standard:  DR 04236 CP

Publication Date:  2007/1/23
Status:  Current
Publisher:  Australia Standards(AS)
Price:  
Number of Pages:38P.;A4  

Description:Specifies methods, and provides data, for calculating the vertical working loads on buried concrete pipes due to the materials covering the pipes and superimposed loads, and for relating the minimum proof test load to the calculated vertical working load  
Catalog:Document Contents
AS/NZS 3725:2007 DESIGN FOR INSTALLATION OF BURIED CONCRETE PIPES
PREFACE
CONTENTS
1 SCOPE
2 APPLICATION
2.1 General
2.2 Use of other materials or methods
2.3 Existing structures
3 REFERENCED DOCUMENTS
4 DEFINITIONS
4.1 Bed zone
4.2 Bedding
4.3 Bedding factor (F)
4.4 Fill
4.5 Foundation
4.6 Haunch zones
4.7 Installation condition
4.8 Overlay zone
4.9 Pipe
4.10 Settlement ratio (rs)
4.11 Side zones
4.12 Superimposed load
4.13 Test loads
4.14 Working load
5 NOTATION
6 VERTICAL LOADS ON PIPES
6.1 Types of loading
6.2 Data required
6.3 Working dead loads due to fill or in situ materials
6.3.1 General
6.3.2 Trench condition
6.3.3 Embankment conditions
6.4 Working loads due to superimposed dead loads
6.5 Working loads due to superimposed live loads
6.5.1 General
6.5.2 Construction and other equipment loads
6.5.3 Road vehicle loads
6.5.4 Railway loads
6.5.5 Aircraft loads
7 INTERNAL WATER LOADS
8 COMPACTION
9 PIPE SUPPORT AND BEDDING FACTORS
9.1 General
9.1.1 Pipe supports
9.1.2 Bedding factors
9.2 Support types
9.2.1 Type U support
9.2.2 Type H support
9.2.3 Type HS support
9.3 Bedding factors for dead loads
9.3.1 General
9.3.2 Reduction of bedding factors
9.3.3 Jacked (thrust) or bored pipes
10 TEST LOADS
10.1 General
10.2 Test loads for steel- or fibre-reinforced pipes not subject to internal pressure
10.3 Test load for unreinforced pipes not subject to internal pressure
10.4 Test loads for steel-reinforced pipes subject to internal pressure
APPENDIX A - CONTROLLED LOW STRENGTH MATERIALS-CLSM
A1 GENERAL
A2 MIX PROPORTIONS
A3 MIX FLOWABILITY
A4 SOIL GRADING
A5 HANDLING AND PLACEMENT
APPENDIX B - SUPERIMPOSED LIVE LOADS
B1 GENERAL
B2 CONSTRUCTION LOADS
B3 ROAD VEHICLE LOADS
B3.1 Australian requirements
B3.2 New Zealand requirements
B4 RAILWAY LOADS
B5 AIRCRAFT LOADS
  
File Format:  PDF(Acrobat Reader) or Word version doc Document
File Size:  555KB
Tile in English:  design for installation of buried concrete pipes

Full Text Information

Related

Top 10

New 10

PC Version