NF EN 12524-2000 Building Materials And Products - Hygrothermal Properties - Tabulated Design Values
Standard Number: NF EN 12524-2000
Title: Building Materials And Products - Hygrothermal Properties - Tabulated Design Values
Language: French
Replaced by Standard: NF EN ISO 10456-2008 building materials and products - hygrothermal properties - tabulated design values and procedures for determining declared and design thermal values.
Publication Date: 2000/9/1
Adopted International Standard: SN EN 12524-2000 Identical
BS EN 12524-2000 Identical
DIN EN 12524 (2000-07)
BS EN 12524-2000 Identical
DIN EN 12524 (2000-07)
Status: Withdrawn
International Classification for Standards (ICS)：CONSTRUCTION MATERIALS AND BUILDING>>Protection of and in buildings>>Thermal insulation
Publisher: Francaise de Normalisation(NF)
Price:
Number of Pages:15
Description:Provides design data in tabular form for moisture and heat transfer calculations, for thermally homogenous materials and products used in building construction. Also gives data to enable calculation and conversion of design thermal values for various environmental conditions.
Catalog:Foreword
1 Scope
2 Normative references
3 Definitions, symbols and units
4 Design thermal values
Bibliography
File Format: PDF(Acrobat Reader) or Word version doc
Document1 Scope
2 Normative references
3 Definitions, symbols and units
4 Design thermal values
Bibliography
File Size: 919KB
Tile in English: Building Materials And Products - Hygrothermal Properties - Tabulated Design Values
Full Text Information
Related
-
NF P75-110-2008 building materials and products - hygrothermal properties - tabulated design values and procedures for determining declared and design thermal values. -
NF EN ISO 10456-2008 building materials and products - hygrothermal properties - tabulated design values and procedures for determining declared and design thermal values.
-
NF EN ISO 10456-2001 building materials and products - procedures for determining declared and design thermal values matiaux et produits du biment. procures pour la dermination des valeurs thermiques dlars et utiles
-
NF P26-432-2007 building hardware - locks - safety bolt latches quincaillerie pour le biment. serrures. verrous de set
-
NF EN 12511-2002 wood poles for overhead lines - determination for characteristic values poteaux en bois pour lignes aiennes. dermination des valeurs caractistiques
-
NF EN 12057-2005 natural stone products - modular tiles - requirements produits modulaires. plaquette de pierre naturelle. exigences
-
NF P85-571-2001 jointing products - impregnated foams - tests produits pour joints. mousses imprns. essais
-
NF EN 1745-2002 masonry and masonry products - methods for determining design thermal values mannerie et ents de mannerie. dermination des valeurs thermiques de calcul
-
NF EN ISO 6785-2008 milk and milk products - detection of salmonella spp. lait et produits laitiers. recherche de salmonella spp.
-
NF EN 10323-2005 steel wire and wire products - bead wire fils et produits tril en acier. fil pour tringle
Top 10
-
NF A 35-552-1-2006
steels for quenching and tempering - part 1 : general technical delivery conditions classification index : a35-552-1 -
NF C32-072-21-2001
(Common test methods for cables under fire conditions - Test for vertical flame spread of vertically-mounted bunched wires or cables - Part 2-1 : procedures - Category A F/R.) -
NF EN 50121-2-2006
Railway applications - Electromagnetic compatibility - Part 2 : emission of the whole railway system to the outside world. -
NF F61-011-1989
(Railway rolling stock. Screwed joint for electrical copper connections driving torque.) -
NF H00-037-1993
(PACKAGING. COMPLETE, FILLED TRANSPORT PACKAGES. TOPPLING TEST. (EUROPEAN STANDARD EN 28768).) -
NF L46-017-1998
(Aerospace series. O-rings, in fluorocarbon rubber (FKM), low compression set. Hardness 80 IRHD.) -
NF P84-310-1981
waterproofing . bituminized aluminium steam barrier. barrie la vapeur en aluminium bitume -
NF F00-037-1984
general railway equipment. tolerancing of metal pieces. permissible deviations of dimensions with no tolerance indication. -
NF C61-910F2-2002
Fiche d'interpration n 910-002 de la norme NF C61-910 d'avil 1984 -
NF E29-272-1932
-
NF E25-801-5-2005
High-strength structural bolting assemblies for preloading - Part 5 : plain washers. -
NF V56-003-2-2013
Vinegar - Isotopic analysis of acetic acid and water - Part 2: 0C-IRMS analysis of acetic acid -
NF P16-321-5-2013
Vitrified clay pipe systems for drains and sewers - Part 5: requirements for perforated pipes and fittings -
NF X50-135-1-2012
Purchasing function - Sustainable purchasing - Guide for the use of ISO 26000 - Part 1 : policy - Strategy. -
NF F00-037-1993
Railway equipment in general. Tolerancing of metal pieces. Permissbiles deviations of dimensions with non tolerance indication. Allowance for machining.
New 10
-
NF EN ISO 13212-2014
Ophthalmic Optics - Contact Lens Care Products - Guidelines For Determination Of Shelf-Life -
NF EN 62660-2-2010
Secondary Lithium-Ion Cells For The Propulsion Of Electric Road Vehicles - Part 2: Reliability And Abuse Testing -
NFC 33 002 Edition 98 AMD 1 (2003)
Insulated Cables And Their Accessories For Power Systems - Accessories Of Distribution Cables Of Rated Voltage 0,6/1 (1,2) Kv - Test Methods And Requirements -
NF EN 673 Edition 98 AMD 2 (2003)
Glass In Building - Determination Of Thermal Transmittance (U Value) - Calculation Method -
NF EN 1097-1 Edition 96 AMD 1 (2004)
Tests For Mechanical And Physical Properties Of Aggregates - Part 1: Determination Of The Resistance To Wear (Micro-Level) -
NF EN 12218 Edition 98 AMD 1 (2002)
Rail Systems For Supporting Medical Equipment -
NF EN 12168 Edition 98 AMD 1 (2002)
Copper And Copper Alloys - Hollow Rod For Free Machining Purposes -
NF EN 12164 Edition 98 AMD 1 (2002)
Copper And Copper Alloys - Rod For Free Machining Purposes -
NF EN 795 Edition 96 AMD 1 (2000)
Protection Against Falls From A Height - Anchor Devices - Requirements And Testing -
NF EN 54-4 Edition 97 AMD 2 (2006)
Fire Detection And Fire Alarm Systems - Part 4: Power Supply Equipment -
NF EN 1423 Edition 97 AMD 1 (2004)
Road Marking Materials - Drop On Materials - Glass Beads, Antiskid Aggregates And Mixtures Of The Two -
NF EN 28662-2 Edition 95 AMD 2 (2002)
Hand-Held Portable Power Tools - Measurement Of Vibrations At The Handle - Part 2: Chipping Hammers And Riveting Hammers -
NF EN 60383-1 Edition 97 AMD 11 (2001)
Insulators For Overhead Lines With A Nominal Voltage Above 1 Kv - Part 1: Ceramic Or Glass Insulator Units For A.C. Systems - Definitions, Test Methods And Acceptance Criteria -
NFC 46 606 Edition 93 AMD 1 (1995)
Fip Bus For Exchange Of Information Between Transmitters, Actuators And Programmable Controllers - Application Layer - Messaging Services -
NF EN 303-1 Edition 99 AMD 1 (2004)
Heating Boilers - Part 1: Heating Boilers With Forced Draught Burners - Terminology, General Requirements, Testing And Marking
Copyright FreeStd.us.
All Rights Reserved.