jQuery Mobile Framework
Search Home >> Standards Wordwide >> Australia Standards(AS) >> AS 1221-1991 fire hose reels

AS 1221-1991 fire hose reels

Standard Number:  AS 1221-1991
Title:  fire hose reels
Language:  English
Replaced by Standard:  AS/NZS 1221-1997 fire hose reels

Replacing Standard:  AS 1221-1989 fire hose reels

Status:  AvailableW
International Classification for Standards (ICS)ENVIRONMENT. HEALTH PROTECTION. SAFETY>>Protection against fire>>Fire-fighting
Publisher:  Australia Standards(AS)
Price:  
Number of Pages:18P.;A4  

Preface:   
Description:Specifies requirements for the design, construction and performance of fixed and swing fire hose reels with either automatic or manual stop valve operation.  
Catalog:Document Contents
AS 1221-1991 FIRE HOSE REELS
PREFACE
CONTENTS
SECTION 1 SCOPE AND GENERAL
1.1 SCOPE
1.2 REFERENCED DOCUMENTS
1.3 DEFINITIONS
1.3.1 Approved
1.3.2 Regulatory authority
1.3.3 Fire hose reel
1.3.4 Fixed fire hose reel
1.3.5 Swing fire hose reel
1.3.6 Automatic fire hose reel
1.3.7 Manual fire hose reel
1.3.8 Jet
1.3.9 Spray
SECTION 2 DESIGN AND CONSTRUCTION REQUIREMENTS
2.1 GENERAL
2.1.1 Design
2.1.2 Operation
2.1.3 Anti-corrosion treatment
2.1.4 Finish
2.1.5 Colour
2.1.6 Screw threads
2.2 COMPONENTS
2.2.1 Hose
2.2.1.1 Diameter and working pressure
2.2.1.2 Material and construction
2.2.1.3 Reinforcement
2.2.1.4 Ultraviolet inhibitor
2.2.1.5 Bursting pressure
2.2.1.6 Ply adhesion
2.2.1.7 Flexibility
2.2.1.8 Length
2.2.1.9 Colour
2.2.2 Nozzle
2.2.2.1 General
2.2.2.2 Twist nozzle
2.2.2.3 Lever nozzle
2.2.3 Drum
2.2.3.1 General
2.2.3.2 Hose support
2.2.3.3 Side plates
2.2.3.4 Spigot or shaft
2.2.4 Inlet pipe
2.2.5 Connection fitting
2.2.6 Stop valve and interlock
2.2.6.1 Manual stop valve
2.2.6.2 Automatic stop valve
2.2.7 Hose guide
SECTION 3 PERFORMANCE REQUIREMENTS
3.1 GENERAL
3.2 FIRE HOSE REEL
3.2.1 Pressure test
3.2.2 Strength tests
3.2.2.1 Assembly
3.2.2.2 Side plates
3.2.3 Unwind test
3.2.4 Discharge tests
3.2.4.1 General
3.2.4.2 Flow rate test
3.2.4.3 Dispersal test
3.3 COMPONENTS
3.3.1 Hose
3.3.1.1 Bursting pressure
3.3.2.2 Ply adhesion
3.3.2.3 Flexibility
3.3.1 Nozzle
3.3.1.1 Twist nozzle
3.3.1.2 Other than twist nozzle
SECTION 4 MARKING
4.1 HOSE
4.2 NOZZLE
4.3 DRUM
4.4 MANUAL STOP VALVE
4.5 INSTALLATION INSTRUCTIONS
APPENDIX A - STRENGTH TEST FOR SIDE PLATES
A1 SCOPE
A2 PRINCIPLE
A3 APPARATUS
A4 CALCULATION
A5 PROCEDURE
A6 REPORT
APPENDIX B - NOZZLE TEST FOR A TWIST NOZZLE
B1 SCOPE
B2 PRINCIPLE
B3 APPARATUS
B4 CALCULATION
B5 PROCEDURE
B6 REPORT
APPENDIX C - NOZZLE TEST FOR AN OTHER THAN TWIST NOZZLE
C1 SCOPE
C2 PRINCIPLE
C3 APPARATUS
C4 PROCEDURE
C5 REPORT
  
File Format:  PDF(Acrobat Reader) or Word version doc Document
File Size:  417KB
Tile in English:  fire hose reels

Full Text Information

Related

Top 10

New 10

PC Version