jQuery Mobile Framework
Search Home >> Standards Wordwide >> Australia Standards(AS) >> AS 2643-1991 fluorescent lamp ballasts of reactive type - performance requirements

AS 2643-1991 fluorescent lamp ballasts of reactive type - performance requirements

Standard Number:  AS 2643-1991
Title:  fluorescent lamp ballasts of reactive type - performance requirements
Language:  English
Replacing Standard:  DR 88029

Revocatory Date:  2005/4/14
Adopted International Standard:  IEC 60921 Ed. 1.0 Equivalent IEC 60921 Ed. 2.1 Similar
Status:  Withdrawn
Publisher:  Australia Standards(AS)
Price:  
Number of Pages:21  

Preface:   
Description:Specifies performance requirements for ballasts of the reactive type designed for use with tubular fluorescent lamps specified in AS 1201. Applies to complete ballasts and their component parts such as reactors, transformers and capacitors (having a capacitance of not more than 0.1 F. Based on IEC 921.  
Catalog:Document Contents
PREFACE
CONTENTS
AS 2643-1991 FLUORESCENT LAMP BALLASTS OF THE REACTIVE TYPE - PERFORMANCE REQUIREMENTS
1 SCOPE
2 REFERENCED DOCUMENTS
3 DEFINITIONS
3.1 High power factor ballast
3.2 High audio-frequency input impedance ballast
3.3 Starting aid
3.4 Starting capacitor
3.5 Choke-test voltage
3.6 Lamp power
3.7 Ballast loss
4 SAFETY REQUIREMENTS
5 CAPACITORS
5.1 Nominal capacitance exceeding 0.1 uF
5.2 Nominal capacitance of 0.1 uF or less
5.3 Radio interference suppression capacitors
6 MARKING
6.1 Mandatory marking
6.2 Information to be provided
7 PERFORMANCE AND TESTING
8 OPEN-CIRCUIT VOLTAGES AT TERMINATION OF LAMP OR STARTER (IF ANY)
8.1 General
8.2 Lamps operated with a starter
8.3 Lamps operated without a starter
9 PREHEATING CONDITIONS
9.1 General
9.2 Lamps operated with a starter
9.3 Lamps operated without a starter
10 LAMP POWER AND CURRENT
10.1 General
10.2 Lamps operated with a starter
10.3 Lamps operated without a starter
11 CIRCUIT POWER FACTOR
12 MAXIMUM CURRENT IN ANY LEAD TO A CATHODE
13 MAGNETIC SCREENING
14 INPUT IMPEDANCE AT AUDIO FREQUENCIES
15 QUIET OPERATION
16 INPUT POWER
16.1 General
16.2 Lamps operated with a starter and instant-start circuits
16.3 Lamps operated without a starter (other than instant-start circuits)
17 BALLAST LOSS
18 LAMP OPERATING CURRENT WAVEFORM
APPENDIX A - GENERAL CONDITIONS OF TESTING
A1 AMBIENT TEMPERATURE
A2 SUPPLY VOLTAGE AND FREQUENCY
A3 INSTRUMENT CHARACTERISTICS
APPENDIX B - REFERENCE BALLASTS
B1 MARKING
B2 DESIGN CHARACTERISTICS
B3 OPERATING CHARACTERISTICS
APPENDIX C - REFERENCE LAMPS
APPENDIX D - TEST CONDITIONS
D1 GENERAL CONDITIONS FOR TESTS
D2 ADDITIONAL REQUIREMENTS FOR TESTING REFERENCE BALLASTS
D3 SELECTION OF REFERENCE LAMPS.
D4 MEASUREMENT OF OPEN-CIRCUIT VOLTAGE
D5 MEASUREMENT OF PRE-HEATING CONDITIONS
D6 MEASUREMENT OF LAMP POWER AND CURRENT
D7 MEASUREMENT OF MAXIMUM CURRENT IN ANY LEAD TO A CATHODE
APPENDIX E - SERIES OPERATION OF TWO FLUORESCENT LAMPS
APPENDIX F - TEST AND REQUIREMENTS OF QUIET OPERATION
F1 SCOPE
F2 TEST APPARATUS
F3 CONDITIONS OF TEST
F4 LIMIT OF NOISE LEVEL
APPENDIX G - DETERMINATION OF BALLAST LOSS
G1 SCOPE
G2 GENERAL
G3 METHOD
  
File Format:  PDF(Acrobat Reader) or Word version doc Document
File Size:  574KB
Tile in English:  fluorescent lamp ballasts of reactive type - performance requirements

Full Text Information

Related

Top 10

New 10

PC Version