Standard Number: IEC 60664-1-2007
Title: Insulation coordination for equipment within low-voltage systems - Part 1: Principles, requirements and tests
Language: English and French
Publication Date: 2007/4/1
Execute Date: 2007/4/26
Adopted International Standard
: DIN EN 60664-1-2008 Insulation coordination for equipment within low-voltage systems - Part 1: Principles, requirements and tests (IEC 60664-1:2007); German version EN 60664-1:2007
,IDT;BS EN 60664-1-2007 insulation coordination for equipment within low-voltage systems -- part 1: principles, requirements and tests
Insulation coordinationfor equipment withinlow-voltage systems —Part 1: Principles, requirements andtests,IDT;EN 60664-1-2007 insulation coordination for equipment within low-voltage systems -- part 1: principles, requirements and tests
,IDT;NF C20-040-1-2007 Insulation coordination for equipment within low-voltage systems - Part 1 : principles, requirements and tests.
,IDT;JIS C60664-1-2009 Insulation coordination for equipment within low-voltage systems -- Part 1: Principles, requirements and tests
,IDT;OEVE/OENORM EN 60664-1-2008,IDT;UNE-EN 60664-1-2008,IDT;GOST R IEC 60127-4-2007 Miniature fuses. Part 4. Universal modular fuse-links for through-hole and surface mount types
Publisher: International Electrotechnical Commission (IEC)
Number of Pages:58P.;A4
Description:GB/T 16935 the provisions of this part of the low pressure system equipment insulation coordination, within this section apply to 2, 000 m, the rated power
Voltage ac to 1 to 30 kHz or dc 000 V, rated frequency to 1 500 V devices.
Depending on the equipment performance standards, this part of equipment clearance and creepage distance and the requirements of solid insulation. This part of the subcontract
Enclosed about insulation coordination Electrical test method.
The provisions of this part of the minimum clearance does not apply to have the place of ionized gas. About the special requirements of the situation can be made of the corresponding production
Product standards technical committee to handle.
This section does not involve determining the following distance:
- through the insulation of the liquid;
- by gas other than the air;
By compressed air.
Note 1: the rated frequency is higher than 3 0 kHz low pressure in the system of equipment insulation coordination according to provisions of IEC 60664-4.
Note 2: may appear high voltage equipment internal circuit.
Note 3: at an altitude of above 000 m size to determine guidelines are shown in table 2 A. 2.
Basis this part is the electrical safety standard, designed to guide the relevant product standards technical committee responsible for the various equipment properly
The relevant requirements, achieve insulation coordination Purpose.
This part is divided into the product standards technical committee to determine the equipment in the air clearance and creepage distance and solid insulation provides the necessary
The guidance of the data.
Manufacturers and product standards technical committee is responsible for the requirements of the application of this basic safety standards, if necessary, the equipment standard fan
In reference to these requirements. '
Such as no relevant product standard numerical and clearance and creepage distance Of solid insulation requirements, or in the case of no standard
The part is used.
: PDF(Acrobat Reader) or Word version doc
Tile in English: Insulation coordination for equipment within low-voltage systems - Part 1: Principles, requirements and tests