IEC 62271-102-2012 high-voltage switchgear and controlgear - part 102: alternating current disconnectors and earthing switches
Standard Number: IEC 62271-102-2012
Title: high-voltage switchgear and controlgear - part 102: alternating current disconnectors and earthing switches
Language: English and French
Replaced by Standard: SS IEC 62271-102-2013
Replacing Standard: IEC 62271-102-2003 High-voltage switchgear and controlgear - Part 102: Alternating current disconnectors and earthing switches
Publication Date: 2012/2/15
Execute Date: 2012/2/15
Revocatory Date: 2013/2/14
Status: Current
International Classification for Standards (ICS)：
ELECTRICAL ENGINEERING>>Switchgear and contolgear>>High voltage switchgear and controlgear
ELECTRICAL ENGINEERING>>Switchgear and contolgear>>Other switchgear and controlgear
ELECTRICAL ENGINEERING>>Switchgear and contolgear>>High voltage switchgear and controlgear
ELECTRICAL ENGINEERING>>Switchgear and contolgear>>Other switchgear and controlgear
CCS Classification for Standards：The electrician>>Power transmission and transformation equipment>>High voltage switch equipment
Publisher: International Electrotechnical Commission (IEC)
Price:
Number of Pages:
Description:iec 62271-102:2001+a1:2011 applies to alternating current disconnectors and earthing switches, designed for indoor and outdoor enclosed and open terminal installations for voltages above 1 000 v and for service frequencies up to and including 60 hz. the technical content is therefore identical to the base edition and its amendment and has been prepared for user convenience. a vertical line in the margin shows where the base publication has been modified by amendment 1. additions and deletions are displayed in red, with deletions being struck through. this publication is to be read in conjunction with iec 60694:1996.this consolidated version consists of the first edition (2001) and its amendment 1 (2011). therefore, no need to order amendment in addition to this publication.
File Format: PDF(Acrobat Reader) or Word version doc
DocumentFile Size: 231KB
Tile in English: high-voltage switchgear and controlgear - part 102: alternating current disconnectors and earthing switches
Full Text Information
Related
-
IEC 62271-102-2003 High-voltage switchgear and controlgear - Part 102: Alternating current disconnectors and earthing switches -
IEC 62271-109-2006 high-voltage switchgear and controlgear - part 109: alternating-current series capacitor by-pass switches
-
IEC 62271-100-2012 high-voltage switchgear and controlgear - part 100: alternating current circuit-breakers
-
IEC 62271-109-2008 High-voltage switchgear and controlgear - Part 109: Alternating-current series capacitor by-pass switches
-
IEC PAS 62271-109-2002 high-voltage switchgear and controlgear - part 109: alternating-current series capacitor by-pass switches
-
IEC 62271-105-2002 High-voltage switchgear and controlgear - Part 105: Alternating current switch-fuse combinations
-
IEC 62271-102 Corrigendum 3-2005 Corrigendum 3 - High-voltage switchgear and controlgear - Part 102: Alternating current disconnectors and earthing switches
-
IEC 62271-100-2008 High-voltage switchgear and controlgear - Part 100: Alternating-current circuit-breakers
-
IEC 62271-110-2012 high-voltage switchgear and controlgear - part 110: inductive load switching
-
IEC 62271-101-2012 high-voltage switchgear and controlgear - part 101: synthetic testing
Top 10
-
IEC 60112-2003
Method for the determination of the proof and the comparative tracking indices of solid insulating materials -
IEC 60137-2003
insulated bushings for alternating voltages above 1000 v -
IEC 60168-2001
tests on indoor and outdoor post insulators of ceramic material or glass for systems with nominal voltages greater than 1000 v -
IEC 60227-4-1992
polyvinyl chloride insulated cables of rated voltages up to and including 450/750 v; part 4: sheathed cables for fixed wiring -
IEC 60269-1-2009
low-voltage fuses - part 1: general requirements -
IEC 60364-7-710-2002
Electrical installations of buildings - Part 7-710: Requirements for special installations or locations; Medical locations -
IEC 60450-2004
Measurement of the average viscometric degree of polymerisation of new and aged cellulosic electrically insulating materials -
IEC 60512-11-12-2002
Connectors for electronic equipment - Tests and measurements - Part 11-12: Climatic tests; Test 11m: Damp heat, cyclic -
IEC 60587-1984
test method for evaluating resistance to tracking and erosion of electrical insulating materials used under severe ambient conditions -
IEC 60598-1-2008
Luminaires - Part 1: General requirements and tests -
IEC 60603-8-1990
Connectors for frequencies below 3 MHz for use with printed boards; part 8: two-part connectors for printed boards for basic grid of 2,54 mm (0,1 in), with square male contacts of 0,63 mm × 0,63 mm -
IEC 60670-1-2002
Boxes and enclosures for electrical accessories for household and similar fixed electrical installations - Part 1: General requirements -
IEC 60846-1-2009
Radiation protection instrumentation - Ambient and/or directional dose equivalent (rate) meters and/or monitors for beta, X and gamma radiation - Part 1: Portable workplace and environmental meters and monitors -
IEC 60865-2-1994
Short-circuit currents - Calculation of effects - Part 2: Examples of calculation -
IEC 62128-2-2013
Railway applications – Fixed installations –Electrical safety, earthing and the return circuit – Part 2: Provisions against the effects of stray currents caused by d.c. traction systems
New 10
-
IEC 60969-2016
Self-ballasted compact fluorescent lamps for general lighting services. Performance requirements -
IEC/PAS 61076-3-124-2016
Connectors for electronic equipment. Product requirements. Detail specification for 10 way, shielded, free and fixed connectors for I/O and Gigabit transmission capability for industrial applications -
IEC TS 62627-09-2016
Fibre optic interconnecting devices and passive components. Vocabulary for passive optical devices. Terminology of passive optical devices -
IEC TR 62278-4-2016
Railway applications. Specification and demonstration of reliability, availability, maintainability and safety (RAMS). RAM risk and RAM life cycle aspects -
IEC/PAS 63062-2016
Maritime navigation and radiocommunication equipment and systems. Removable external data source (REDS). General requirements, methods of testing and required test results -
IEC 60311-2016
Electric irons for household or similar use. Methods for measuring performance -
IEC 62885-2-2016
Surface cleaning appliances. Dry vacuum cleaners for household or similar use. Methods for measuring the performance -
IEC TR 62970-2016
Guidance on how to conduct round robin tests for household and similar electrical appliances -
IEC 61000-4-23-2016
Electromagnetic compatibility (EMC) . Testing and measurement techniques. Test methods for protective devices for HEMP and other radiated disturbances -
IEC 60092-353-2016
Electrical installations in ships. Power cables for rated voltages 1 kV and 3 kV -
IEC 62629-22-1-2016
3D display devices. Measuring methods for autostereoscopic displays. Optical -
IEC 60404-10-2016
Magnetic materials. Methods of measurement of magnetic properties of electrical steel strip and sheet at medium frequencies -
IEC 62917-2016
Railway applications. Fixed installations. Electric traction. Copper and copper alloy grooved contact wires -
IEC 62848-1-2016
Railway applications. DC surge arresters and voltage limiting devices. Metal-oxide surge arresters without gaps -
IEC 62846-2016
Railway applications. Current collection systems. Requirements for and validation of measurements of the dynamic interaction between pantograph and overhead contact line
Copyright FreeStd.us.
All Rights Reserved.