jQuery Mobile Framework
Search Home >> Standards Wordwide >> Australia Standards(AS) >> AS/NZS 4506-1998 metal finishing - thermoset powder coatings

AS/NZS 4506-1998 metal finishing - thermoset powder coatings

Standard Number:  AS/NZS 4506-1998
Title:  metal finishing - thermoset powder coatings
Language:  English
Replacing Standard:  DR 95108

Status:  Withdrawn
International Classification for Standards (ICS)MANUFACTURING ENGINEERING>>Surface treatment and coating>>Surface treatment
Publisher:  Australia Standards(AS)
Price:  
Number of Pages:22  

Preface:   
Description:Sets out test procedures and specifies performance requirements for thermoset powder coatings applied to metal substrates, with the exception of aluminium for architectural applications (see AS 3715). The Standard classifies service environments into five categories and specifies a minimum coating thickness for each category. Appendices give advice on surface pretreatment prior to powder coating, weathering performance and maintenance of powder-coated metal.  
Catalog:Document Contents
AS/NZS 4506:1998 METAL FINISHING - THERMOSET POWDER COATINGS
PREFACE
CONTENTS
FOREWORD
SECTION 1 SCOPE AND GENERAL
1.1 SCOPE
1.2 REFERENCED DOCUMENTS
1.3 DEFINITIONS
1.3.1 Base metal
1.3.2 Chemical conversion treatment
1.3.3 Powder-coated metal
1.3.4 Pretreated metal
1.3.5 Significant surface
1.4 SERVICE CONDITION CATEGORIES
1.5 SAFETY REQUIREMENTS
SECTION 2 PERFORMANCE REQUIREMENTS
2.1 GENERAL
2.2 PRETREATMENT
2.3 APPEARANCE
2.4 SPECULAR GLOSS
2.5 COATING THICKNESS
2.6 CURE TEST (SOLVENT RESISTANCE METHOD)
2.7 ADHESION (CROSS-CUT)
2.8 PENCIL HARDNESS
2.9 HUMIDITY RESISTANCE
2.10 REVERSE IMPACT RESISTANCE
2.11 DURABILITY OF POWDER COATINGS EXPOSED TO WEATHERING
2.12 CORROSION RESISTANCE
2.13 WATER PERMEABILITY TEST
2.14 RESISTANCE TO MORTAR
APPENDIX A - PURCHASING GUIDELINES
A1 GENERAL
A2 INFORMATION TO BE SUPPLIED BY THE PURCHASER
APPENDIX B - WEATHERING PERFORMANCE OF POWDER-COATED METAL PRODUCTS
B1 GENERAL
B2 LOSS OF GLOSS
B3 CHALKING
B4 CHECKING
B5 DISCOLOURATION
B6 EROSION OF POWDER COATINGS
APPENDIX C - MAINTENANCE OF POWDER-COATED METAL
APPENDIX D - HANDLING AND TEMPORARY PROTECTION DURING TRANSPORTATION AND INSTALLATION
D1 GENERAL
D2 TRANSPORTATION
D3 STORAGE
D4 INSTALLATION
D5 BRICK CLEANING
APPENDIX E - ATMOSPHERIC ENVIRONMENTS
E1 GENERAL
E2 ATMOSPHERIC CLASSIFICATIONS
APPENDIX F - SELECTION OF TEST SAMPLES
F1 SCOPE
F2 SELECTION
F2.1 Sheet and strip products
F2.2 Extruded products
F2.3 Castings and forgings
F2.4 Test panels
F2.5 Frequency
APPENDIX G - SURFACE PRETREATMENT FOR POWDER COATINGS
G1 UNTREATED SURFACES
G2 ABRASIVE-TREATED SURFACES
G3 CHEMICAL PRETREATMENT
G3.1 General
G3.2 Iron and steel
G3.3 Zinc
G3.4 Aluminium
G3.5 Copper and brass
G3.6 Stainless steeland electroplated chromium
G3.7 Outgassing
G3.8 Recoating painted product
APPENDIX H - TEST METHODS FOR DURABILITY AND CORROSION RESISTANCE
H1 SCOPE
H2 DURABILITY TEST
H3 SALT SPRAY TEST
H4 REPORT
H4.1 Durability test
H4.2 Salt spray test
APPENDIX I - WATER PERMEABILITY TEST
I1 SCOPE
I2 APPARATUS
I3 PROCEDURE
I4 REPORT
APPENDIX J - TEST METHOD FOR RESISTANCE TO MORTAR
J1 SCOPE
J2 PRINCIPLE
J3 MATERIALS
J4 PROCEDURE
J5 REPORT
  
File Format:  PDF(Acrobat Reader) or Word version doc Document
File Size:  661KB
Tile in English:  metal finishing - thermoset powder coatings

Full Text Information

Related

Top 10

New 10

PC Version