jQuery Mobile Framework
Search Home >> American Standards >> American Society for Testing Material (ASTM) >> ASTM E1444/E1444M-2011 standard practice for magnetic particle testing

ASTM E1444/E1444M-2011 standard practice for magnetic particle testing

Standard Number:  ASTM E1444/E1444M-2011
Title:  standard practice for magnetic particle testing
Language:  English
Replaced by Standard:  ASTM E1444/E1444M-2012

Replacing Standard:  ASTM E1444;SAE AMS2640K;SAE AMS2640J

Publication Date:  2011/8/1
Execute Date:  2011/8/1
Status:  Withdrawn
International Classification for Standards (ICS)METALLURGY>>Testing of metals>>Non-destructive testing of metals
Publisher:  American Society for Testing Material (ASTM)
Number of Pages:21  

Description:1.1 this practice establishes minimum requirements formagnetic particle testing used for the detection of surface orslightly subsurface discontinuities in ferromagnetic material.guide e709 can be used in conjunction with this practice as atutorial.note 1—this practice replaces mil-std-1949.1.2 the magnetic particle testing method is used to detectcracks, laps, seams, inclusions, and other discontinuities on ornear the surface of ferromagnetic materials. magnetic particletesting may be applied to raw material, billets, finished andsemi-finished materials, welds, and in-service parts. magneticparticle testing is not applicable to non-ferromagnetic metalsand alloys such as austenitic stainless steels. see appendix x1for additional information.1.3 all areas of this practice may be open to agreementbetween the cognizant engineering organization and thesupplier, or specific direction from the cognizant engineeringorganization.1.4 this standard is a combined standard, an astm standardin which rationalized si units and inch-pound units areincluded in the same standard, with each system of units to beregarded separately as standard.1.4.1 units—the values stated in either si units or inchpoundunits are to be regarded separately as standard. thevalues stated in each system may not be exact equivalents;therefore, each system shall be used independently of the other.combining values from the two systems may result in nonconformancewith the standard.1.5 this standard does not purport to address all of thesafety concerns, if any, associated with its use. it is theresponsibility of the user of this standard to establish appropriatesafety and health practices and determine the applicabilityof regulatory limitations prior to use.  
File Format:  PDF(Acrobat Reader) or Word version doc Document
File Size:  535KB
Tile in English:  standard practice for magnetic particle testing

Full Text Information


Top 10

New 10

PC Version