jQuery Mobile Framework
Search Home >> American Standards >> American Society for Testing Material (ASTM) >> ASTM F 2178-2006 standard test method for determining the arc rating and standard specification for face protective products

ASTM F 2178-2006 standard test method for determining the arc rating and standard specification for face protective products

Standard Number:  ASTM F 2178-2006
Title:  standard test method for determining the arc rating and standard specification for face protective products
Language:  English
Replaced by Standard:  ASTM F2178-08

Replacing Standard:  ASTM F 2178-2002

Publication Date:  2006/11/15
Execute Date:  2006/11/15
Revocatory Date:  2008/11/21
Status:  Withdrawn
Publisher:  American Society for Testing Material (ASTM)
Price:  
Number of Pages:14  

Description:1.1 this test method and product specification is used to measure the arc rating and specify the requirements for products intended for use as face protection for workers exposed to electric arcs that would generate heat flux values from 84 to 25 120 kw/m2 [2 to 600 cal/cm2s]. products are tested as sold.1.2 this test method determines an arc rating for face protective products. the faceshield or other applicable portions of the complete product must meet ansi z87.1. this excludes the textile or non ansi z87.1 testable parts of the hood assemblies or other tested products. this standard does not measure optical and impact properties (see ansi z87.1) but does specify requirements for optical and impact properties.1.3 the materials covered by this standard are in the form of faceshields attached to the head by protective helmets (hard hats), headgear, or hood assemblies. faceshields are tested with or without other face and head protective products, for example, sock hoods, balaclavas, sweat shirt hoods or jacket hoods.1.3.1 fabric layers used in hood assemblies or other items tested under this standard shall meet the requirements of specification f 1506.1.4 this test method shall be used to measure and describe the properties of materials, products, or assemblies in response to convective and radiant energy generated by an electric arc under controlled laboratory conditions and does not purport to predict damage from light other than the thermal aspects measured.1.5 unitsthe values stated in si units shall be regarded as standard except as noted. within the text, alternate units are shown in brackets. the values stated in each system may not be exact equivalents; therefore, alternate systems must be used independently of the other. combining values from the systems described in the text may result in nonconformance with the method.1.6 this standard does not purport to describe or appraise the effect of the electric arc fragmentation explosion and subsequent molten metal splatter, which involves the pressure wave containing molten metals and possible fragments of other materials except to the extent that heat energy transmission due to these arc explosion phenomena is reduced by test specimens.1.8 this standard shall not be used to describe or appraise the fire hazard or fire risk of materials, products, or assemblies under actual fire conditions. however, results of this test may be used as elements of a fire assessment which takes into account all of the factors which are pertinent to an assessment of the fire hazard of a particular end use.this standard does not purport to address all of the safety concerns, if any, associated with its use. it is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use. for specific precautions, see section 7.  
File Format:  PDF(Acrobat Reader) or Word version doc Document
File Size:  277KB
Tile in English:  standard test method for determining the arc rating and standard specification for face protective products

Full Text Information

Related

Top 10

New 10

PC Version