Standard Number: GB 2099.2-2012
Title: plugs and socket-outlets for household and similar purposes - part 2: particular requirements for socket-outlets for appliances
Language: Simplified Chinese
Publication Date: 2012/12/31
Execute Date: 2013/12/1
Publisher: Chinese Standards(GB)
Number of Pages:11
Description:GB 2099.1-2008 of this chapter to make the following changes after apply.
The first paragraph to replace:
The provisions of this part of the household and similar use utensils socket terminal and end, structure, mechanical properties and electrical properties of technical requirements.
This section apply only to an alternating current, rated voltage not exceeding 250 v, rated current is less than 16 a, with or without grounding plug cover, built-in or plan to install in the equipment or fixed to the appliance socket, to The appliance socket for short.
After the fourth section:
If also intended for stationary devices, utensils socket should be equipped with devices for fixed to the installation of the appropriate box.
In vertical on utensils socket plan to use appliances and office equipment, computer, audio and video camera equipment, oil absorption, stoves and other appliances.
If necessary, in the utensils or equipment in the standard use of appliance socket.
Appliance socket surrounding environment temperature is usually not more than three Occasionally 5 ℃, 40 ℃.
: Before it Ⅰ range 1 2 normative reference file 1 3 terms and definitions
1 4 general requirements
2 5 test outline 2 6 rating 2 7 classification 2 8 mark 2 9 size check grounding measures, prevent to get an electric shock 2 November 2 3 12 terminals And end 3 13 fixed socket structure of 4 14 15 interlock socket plugs and the structure of the movable socket 4 April 16 ageing resistance, the protection provided by shell and moistureproof 4 17 18 grounding insulation resistance and dielectric strength 4 contact work 4 19 temperature 5 20 breaking capacity Volume 5 21 normal operation and pull out the plug of force required 5 23 and soft cable connection 24 mechanical strength 5 25 heat 6 26 screw, current carrying parts and its connection 27, electrical clearance and creepage distance by the distance of the sealant 6 and insulation resistance is not Thermal, resistance to fuel and electricity mark 6 29 rust resistance 30 pin with insulating sheath the additional test of 6 table 101 of the force applied to insert 3 102 insert table size and the relationship between the rated current of 4 103 ballistic pendulum hammer falling height and spring the relationship between the energy value of 5
: PDF(Acrobat Reader) or Word version doc
Tile in English: plugs and socket-outlets for household and similar purposes - part 2: particular requirements for socket-outlets for appliances