jQuery Mobile Framework
Search Home >> Standards Wordwide >> Australia Standards(AS) >> AS/NZS 1562.3-1996 Design and installation of sheet roof and wall cladding - Plastic

AS/NZS 1562.3-1996 Design and installation of sheet roof and wall cladding - Plastic

Standard Number:  AS/NZS 1562.3-1996
Title:  Design and installation of sheet roof and wall cladding - Plastic
Language:  English
Publication Date:  1996/1/15
Execute Date:  1996/3/5
Status:  AvailableW
Publisher:  Australia Standards(AS)
Price:  
Number of Pages:20P.;A4  

Description:Specifies the procedures for the design and installation of plastic roof and wall cladding materials.  
Catalog:Document Contents
AS/NZS 1562.3:1996 DESIGN AND INSTALLATION OF SHEET ROOF AND WALL CLADDING - PLASTIC
PREFACE
CONTENTS
SECTION 1 SCOPE AND GENERAL
1.1 SCOPE
1.2 REFERENCED DOCUMENTS
1.3 REFERENCED STANDARDS
SECTION 2 GENERAL REQUIREMENTS
2.1 SCOPE OF SECTION
2.2 MATERIAL
2.3 TRANSPORT, HANDLING AND STORAGE
2.4 SAFETY PRECAUTIONS
2.4.1 General
2.4.2 Fire precautions
2.4.3 Safety mesh
2.4.4 Walking and standing on roofs
SECTION 3 DESIGN OF PLASTIC ROOF AND WALL CLADDING
3.1 SCOPE OF SECTION
3.2 AGGRESSIVE ENVIRONMENTS
3.3 LOADINGS
3.3.1 Wind forces
3.3.2 Loadings during construction
3.3.3 Bracing
3.4 SUPPORTING STRUCTURE
3.5 RAFTERS, BATTENS AND PURLINS
3.5.1 Alignment
3.5.2 Width and depth
3.6 STUDS AND NOGGINGS (DWANGS)
3.6.1 Alignment
3.6.2 Width and depth
3.7 FASTENERS
SECTION 4 INSTALLATION
4.1 INSTALLATION OF ROOF AND WALL CLADDING SHEETS
4.1.1 Scope
4.1.2 General provisions
4.1.3 Installation of safety mesh
4.2 INSTALLATION OF uPVC WALL CLADDING BOARDS
4.2.1 Scope
4.2.2 Application
4.2.3 General provisions
4.2.4 Handling and storage
4.2.5 Installation precautions
4.2.6 Installation
SECTION 5 TESTING
5.1 APPLICABILITY OF TESTS
5.2 RESISTANCE TO WIND FORCES
5.2.1 General
5.2.2 Resistance to wind pressures for non-cyclone regions
5.2.3 Resistance to wind pressures for cyclone regions
5.3 RESISTANCE TO IMPACT (SANDBAG) FOR ROOFING SHEET MATERIALS
5.3.1 General
5.3.2 Assessment
5.4 RESISTANCE TO IMPACT (SANDBAG) FOR WALL CLADDING BOARDS
APPENDIX A - LIST OF REFERENCED DOCUMENTS
APPENDIX B - SAFETY MESH
B1 GENERAL
B2 LOADING
B3 DEEMED TO COMPLY
B4 POSITION AND FIXING
B5 CORROSIVE ATMOSPHERE
APPENDIX C - SAFETY MESH LOAD TEST
C1 SCOPE
C2 PRINCIPLE
C3 APPARATUS
C3.1 Test frame
C3.2 Test loads
C4 TEST SPECIMEN
C5 PROCEDURE
C6 REPORT
  
File Format:  PDF(Acrobat Reader) or Word version doc Document
File Size:  245KB
Tile in English:  Design and installation of sheet roof and wall cladding - Plastic

Full Text Information

Related

Top 10

New 10

PC Version