Standard Number: ISO/TS 19022-2016
Title: Plastics -- Method of controlled acceleration of laboratory weathering by increased irradiance
Language: English
Replaced by Standard:
Replacing Standard:
Publication Date: 2016/1/26
Execute Date: 2016/2/1
Revocatory Date: 2000/1/1
Adopted International Standard:
Status:
Standard Type:
CCS Classification for Standards:
Publisher: International Organization for Standardization (ISO)
Price:
Number of Pages:10
Preface:
Description:ISO/TS 19022:2016 specifies a test method which allows predicting the aging rate of material specimens, e.g. plastics, under interest independent of the aging mechanisms as a function of radiant exposure. The UV irradiance of a simulated solar radiation (with a laboratory radiation source) will be extended above the normal maximum level on earth surface while keeping all relevant temperature parameters fixed.NOTE For translucent plastics, the surface temperatures are below the white standard temperature. In addition, the maximum temperature is not on the irradiated surface, it is somewhere inside the plastic material.
Overview:
Cross References:
Catalog:ISO/TS 19022:2016 specifies a test method which allows predicting the aging rate of material specimens, e.g. plastics, under interest independent of the aging mechanisms as a function of radiant exposure. The UV irradiance of a simulated solar radiation (with a laboratory radiation source) will be extended above the normal maximum level on earth surface while keeping all relevant temperature parameters fixed.NOTE For translucent plastics, the surface temperatures are below the white standard temperature. In addition, the maximum temperature is not on the irradiated surface, it is somewhere inside the plastic material.
File Format: PDF(Acrobat Reader) or Word version doc
Document
File Size: 412KB
Tile in English: Plastics -- Method of controlled acceleration of laboratory weathering by increased irradiance