jQuery Mobile Framework
Search Home >> American Standards >> American Society of Mechanical Engineers (ASME) >> ASME A112.19.2-2008 Ceramic Plumbing Fixtures

ASME A112.19.2-2008 Ceramic Plumbing Fixtures

Standard Number:  ASME A112.19.2-2008
Title:  Ceramic Plumbing Fixtures
Language:  English
Status:  Withdrawn
Publisher:  American Society of Mechanical Engineers (ASME)
Number of Pages:110  

Description:Describes vitreous and non-vitreous china plumbing fixtures and specifies requirements for materials, construction, performance, testing, and markings.  
0 Introduction
1 Scope
2 Reference publications
3 Definitions and abbreviations
3.1 Definitions
3.2 Abbreviations
4 General requirements
4.1 Dimensions and tolerances
4.2 Glazing
4.3 Waste fitting openings, drainage, and overflows
4.4 Off-the-floor plumbing fixture supports
4.5 Non-vitreous ceramic plumbing fixtures
4.6 Additional requirements for water closets
4.7 Additional requirements for urinals
4.8 Additional requirements for lavatories, sinks, and bidets
4.9 Additional requirements for bathtubs and shower bases
4.10 Additional requirements for drinking fountains
4.11 Accessible design fixtures
5 Flushing devices
5.1 General
5.2 Gravity flush tanks
5.3 Pressurized flushing devices
5.4 Plastic water closet tanks
5.5 Electrical components of electro-hydraulic water closets
5.6 Dual-flush water closets
6 Tests - Materials, finishes, structural integrity, and seals
6.1 Absorption test
6.2 Crazing test
6.3 Surface examination
6.4 Warpage test
6.5 Field-installed flange test
6.6 Overflow test
6.7 Structural integrity tests for wall-mounted plumbing
6.8 Structural integrity test for bathtubs, shower bases, and
non-vitreous service sinks
6.9 Joint seal test
6.10 Auger test
6.11 Condensation-free (insulated) tank test
7 Water closet tests
7.1 General
7.2 Trap seal depth determination test
7.3 Trap seal restoration test
7.4 Water consumption test
7.5 Granule and ball test
7.6 Surface wash test
7.7 Mixed media test
7.8 Drain line transport characterization test
7.9 Overflow test for gravity flush tanks
8 Urinal tests
8.1 General
8.2 Test apparatus and general instructions
8.3 Trap seal depth determination test
8.4 Surface wash test
8.5 Dye test
8.6 Water consumption test
8.7 Tests for non-water-consuming urinals
9 Markings, packaging, and installation instructions and
other literature
9.1 General
9.2 Non-standard fixtures
9.3 Additional markings for water closets and urinals
9.4 Field-installed flanges
9.5 Packaging
9.6 Installation instructions and other literature
A (informative) - Suggested formats for reporting test results
B (informative) - Unit conversion criteria  
File Format:  PDF(Acrobat Reader) or Word version doc Document
File Size:  742KB
Tile in English:  Ceramic Plumbing Fixtures

Full Text Information


Top 10

New 10

PC Version